This doesn't make sense at all... Can anybody recommend another zigbee radiator thermostat that I can use instead of these? It serves for receiving information from ZigBee devices and for sending commands to the devices. I did that by configuring the thing channel with min and max values of 0 and 255 instead of 0 and 100. Add a file called zigbee2mqtt.things (this same but my Bridke is mqtt:broker:Mosguitto) One feature I absolutely love in Zigbee2MQTT is the network map. But I preferred turning them off, so when turning them back on, they'd always be set to the very temperature they had been set to before. Setting the temperature works though. You can run the mqtt “server” on either your openhab instance or as in my case I run it on a different server. It's in German. network map generation. someone happens to know why On the Zigbee Cluster Library specification (ZCL), … Setting temperature works from HA thermostat, but setting system_mode reports the same issue (also publishing via mqtt directly). That might be something I will try out, if I don't get this to work. Another difference in my setup is, that I use a CC26X2R1. What are you guys using? They were not willing to release and OTA in the past and the TRADFRI wireless dimmer. Firmware version is 22190930, Yep this looks more correct than 1.15.0 which is indeed de zigbee2mqtt version, my mostly working (old) one is Can anyone confirm this? But I would be not surprised if it takes much longer. Luckily, both Zigbee2MQTT and ZHA support Zigbee Groups. "appVersion":18,"stackVersion":5,"hwVersion":34,"dateCode":"20190408","swBuildId":"18181120". I'm not certain, please advise. I'm not really satisfied of any of them. And indeed, correcting my statement above, the second one does not react when trying to set current_heating_setpoint: ERROR: Publish 'set' 'current_heating_setpoint' to 'Heizung Hobbykeller links' failed: 'Error: Write 0x00158d00053d4419/1 hvacThermostat({"16387":{"value":2300,"type":41}}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4151,"transactionSequenceNumber":null}) failed (Data request failed with error: 'Timeout' (9999))' we had to send in our units for updates. You can request zigbee2mqtt to put out a Graphviz representation of how your ZigBee network is set up. Zigbee2mqtt and Zigbee bulbs small tutorial, zigbee2mqtt up and running with working Zigbee sniffer (ie CC2531 or similar), Trådfri bulbs which are included in the zigbee network (they can be a pain to include, for me 6 very short ons and longer offs made it possible to reset them), Philips HUE white bulbs (I’ve used the regular cheap HUE White which you should be able to get for 6-7$ a piece. The OP used OH2 2.5.0-M1, would this solve my issue? Every command line may terminate with a special configurable byte: CR (0x0D), LF (0x0A) or 0x03 (ETX). People usually buy this device because it is on the device support list. 18.5 will become 1850. TuYa seems popular here, but personally I’m not a big fan of their custom protocol on top of zigbee approach. Successfully merging a pull request may close this issue. connecting to WiFi, we can start with packaged dependencies. Oh yeah, you are absolutely right. action: mqtt-action Just type sudo journalctl -u zigbee2mqtt.service -f and you’ll see the log. I have two of those thermostats, and they paired without problems. I thought I would cover the procedure in case you get stuck on how to add new devices to Zigbee2MQTT. WIll still need to handle incoming values in the range 1-254 then. I'm currently using a Pi 4 + a CC2531 stick. # MQTT is running fine with other devices and iam on OH2 2.4 stable. sudo mosquitto_passwd -c users projectsdiy How to convert mqtt output "zigbee2mqtt/Zigbee_Ikea_Dnevna/set 1 ? Frost protection mode. :). �[38;5;220;1mzigbee-herdsman:controller:endpoint �[0mWrite 0x00158d000192392d/1 hvacThermostat({"16387":{"value":1900,"type":41}}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4151,"transactionSequenceNumber":null}) �[38;5;220m+17s�[0m The problems result from a software update. �[38;5;33;1mzigbee-herdsman:adapter:zStack:unpi:writer �[0m--> frame [254,20,36,1,242,152,1,1,1,2,6,0,30,10,20,55,16,6,2,3,64,41,108,7,124] �[38;5;33m+6s�[0m Here's my free Github. Everything is working wonderfully now. I also tried transformationPatternOut=“JSONPATH:$.brightness”, whis also doesnt work. As the device is sleeping by default, you need to wake it up after sending the bind/unbind command by pressing the reset button once. I cannot change color_mode with a mqtt client, but color_temp is possible I consistently get the INVALID_VALUE, almost instantaneously. The receiver must receive the command and then do a system call to execute the command. Also for HUE White the value 1 is also off (at least from my experiment, thus if we get 1 we should display that as 0 in openhab). Will they share the file, or will the update have to happen via there hub? It was also easy with the Zemismart Zigbee RGB Downlight (review soon), but I was not able to read the state or control the device as the Zemismart Zigbee RGB Downlight was not on the list of the supported devices. On 10 Dec 2020, at 14:51, Steffen Rusitschka ***@***. If I see the dimmer slider at a certain percent I would expect it to be on. — Getting data from the thermostat works fine, but sending messages to the thermostat does not work. Some info below just to corroborate: I only have the problem of sending the "off" command through zigbee2mqtt to the Eurotronic ZigBee thermostat. Sadly I can replicate it, I now also get INVALID_VALUE back. The best advice I can give you is to look at the updates as often commands will have to have the same JSON structure. No need for conversions as Zigbee2MQTT will do the math. Copied back my 1.15.0 version and everything runs smoothly again. For Openhab you will need to have the following addons installed: > Reply to this email directly, view it on GitHub, or unsubscribe. Here's my free translation: The device you purchased is from us. I am on your side i also would prefer to turn off the thermostats but as i figured out turning off wouldn´t make sense cause it costs more energy to come back from 5 to 20 than from for example 15 to 20. only reason for turning off would be when you´re away from home for holidays maybe. The text was updated successfully, but these errors were encountered: Hmmm. Would be great to see an update soon. at ZStackAdapter. If they follow through, that would be great news. 3 of which not working properly (they can be controlled, but they do not report any changes, either manually, or via controller, so they always display 20°C no matter what they are actually set to), and 1 that does not work at all (which would be the 10th, but I removed it since it cannot be operated). Not sure if or where you can see the firmware version for the thermostats. I forgot about that. �[38;5;27;1mzigbee-herdsman:adapter:zStack:adapter �[0msendZclFrameToEndpointInternal 0x00158d00053d4419:39154/1 (0,0,1) �[38;5;27m+6s�[0m How to reproduce it (minimal and precise) Just subscribe to device status and send a set color command in RGB format, than look at the reported state (color in xy format). On 10 Nov 2020, at 14:42, Steffen Rusitschka ***@***. It will work even when home automation software, zigbee2mqtt or the coordinator is down. > I'll flash my Sniffer stick and see if I can find anything about it. What I mean is that OpenHab still needs to handle the case when incoming values are in the range of 1-254 in decimal format (10 base), unless you can force zigbee2mqtt to output brightness_percent. Reply to this email directly, view it on GitHub, or unsubscribe. We currently work on it with highest priority. Sorry, but how do I access via the “console”? ***> wrote: I do like there aesthetic though. You do, however, get a different error than @Brunes and me. The purpose is to execute commands after triggers triggered by … But when using 5°C instead of off, setting it to 20 will actually turn it on). It looks like the outgoing transformation statement is ignored by the MQTT binding. <, Will they share the file, or will the update have to happen via there hub? As the the log suggests, there was a timeout. Getting data from the thermostat works fine, but sending … ~ sjorge. It's all working now with my self-made flow but nevertheless, I think that having a fully functional thermostat is mandatory and what we all payed for. If you send { "brightness_percent": 50} it will set brightness to 50%. I cannot figure out how to pair a zigbee device (in my case a relay) , like how I usually do with a z wave device without looking at the logs. For example, when opening a window in the room with the thermostat in, it would set the thermostat to off. Build support through z2m? [nt.ItemStatePredictedEvent] - ZigbeeKitchenBulbSwitch predicted to become NULL, mosquitto_sub -h brokerIpaddress -v -t ‘zigbee2mqtt/#’. To do this send a payload like below to zigbee2mqtt/FRIENDLY_NAME/set. �[38;5;33;1mzigbee-herdsman:adapter:zStack:unpi:writer �[0m--> frame [254,20,36,1,127,195,1,1,1,2,3,0,30,10,20,55,16,4,2,3,64,41,108,7,173] �[38;5;33m+17s�[0m, �[38;5;169;1mzigbee-herdsman:adapter:zStack:znp:AREQ �[0m<-- AF - incomingMsg - {"groupid":0,"clusterid":513,"srcaddr":50047,"srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"linkquality":84,"securityuse":0,"timestamp":6847669,"transseqnumber":0,"len":6,"data":{"type":"Buffer","data":[28,55,16,4,4,0]}} �[38;5;169m+19ms�[0m There are currently 7 of these thermostats spread around my house. Hi Guys, When pressing a zigbee button or sending in MQTT command to a lamp takes about 1.5 seconds. https://www.zigbee2mqtt.io/information/ota_updates.html z2m will do it. tuya worked but does the weird tuya stuff, the se one never really worked well for me. When sending 2 commands directly after one another to turn on 2 lights. I got a response from Eurotronic. A file called: convert2percentage.js The problems result from a software update. sound a lot more promising. Bug Report What happened After changing coordinator to slaesh’s CC2652RB stick I'm unable to control lights by its group. I have a CC2530 lying around, so I might try that one out to see if it makes any difference. Welcome to the Zigbee2MQTT documentation! translation: It's in German. so is see when i compare my zigbee door sensors to my shelly wifi door sensors. Neither setting the attribute current_heating_setpoint nor trying to read it produces a logged zigbee message. Reply. Which is used if you need to turn off the radiators in the winter. In the past we also asked Eurotronics for firmware images which they refused to provided. Have any of you experience with different zigbee (or even wifi, or anything reliable) thermostats, ideally to use with Home Assistant? To add a new user run the command mosquitto_passwd -c username username. I've got three of them and got a new one recently: "appVersion":18,"stackVersion":5,"hwVersion":34,"dateCode":"20190408","swBuildId":"18181120", The Zigbee payload is identical apart from sequence number and counter. For example, when opening a window in the room with the thermostat in, it would set the thermostat to off. See also the official documentation . We currently work on it with highest priority. We expect the update to be available in two weeks. Not sure when they added that but it’s in the current master tree over on GitHub. a new, currently empty, repo has been created by Tomáš (@Witriol): https://github.com/EUROTRONIC-Technology/Spirit-ZigBee. Are there any news on this? to your account. You are receiving this because you were mentioned. at fulfilled (/opt/zigbee2mqtt/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:24:58). as far as i know zigbee consumes less power than normal wifi. I expected the temperature setpoint to bet set. This is working. Netamo used some other low power RF for theirs, but I don’t think the meet the must work without cloud. Luckily, both Zigbee2MQTT and ZHA support Zigbee Groups. Could also be a permission thing, check that the script is accessible for the openhab user. It’s a good practice (since the IKEA bulbs look-alike) to use a permanent pen to mark the bulbs too! Would be nice to have other users chime in too. There is progress with OTA updates: dresden-elektronik/deconz-rest-plugin#1098 (comment). Updated with some of the suggestions, hopefully making it a bit more understandable. The UART interface is designed to send text or hex commands between an external device (e.g. only brightness) and it’s possible to set a … The pairing process for the IKEA and Xiaomi devices went well. Nice! Mostly I have take bits and pieces from other topics. The maximum command size is 127 bytes. > Here's the one for the not working device: �[34mZigbee2MQTT:debug�[39m 2020-10-07 17:05:27: Received MQTT message on 'zigbee2mqtt/Heizung Hobbykeller links/set' with data '{"current_heating_setpoint":19}' I did switch to using mosquitto_pub vs using the frontend to change it though. viessmann is currently the best hardware wise, but the firmware is problematic. Error message as follows: MQTT publish: topic 'zigbee2mqtt/bridge/log', payload '{"message":"Publish 'set' 'system_mode' to 'Eurospirit ZigBee Thermostat 1' failed: 'Error: Write 0x00158d00053d2dcc/1 hvacThermostat({\"16392\":{\"value\":33,\"type\":34}}, {\"timeout\":10000,\"disableResponse\":false,\"disableRecovery\":false,\"disableDefaultResponse\":true,\"direction\":0,\"srcEndpoint\":null,\"reservedBits\":0,\"manufacturerCode\":4151,\"transactionSequenceNumber\":null}) failed (Status 'INVALID_VALUE')'","meta":{"friendly_name":"Eurospirit ZigBee Thermostat 1"},"type":"zigbee_publish_error"}'. On 8 Jan 2021, at 12:54, prankousky ***@***. After we fixed the problem an over-the-air update will be provided on Github. It is not a fake device. > The device you purchased is from us. > After we fixed the problem an over-the-air update will be provided on — Reported color in the same format (and values ;=)) as issued by the (latest) command. �[38;5;161;1mzigbee-herdsman:controller:log �[0mReceived 'zcl' data '{"frame":{"Header":{"frameControl":{"frameType":0,"manufacturerSpecific":true,"direction":1,"disableDefaultResponse":true,"reservedBits":0},"transactionSequenceNumber":4,"manufacturerCode":4151,"commandIdentifier":4},"Payload":[{"status":0}]},"address":50047,"endpoint":1,"linkquality":84,"groupID":0}' �[38;5;161m+20s�[0m, �[38;5;169;1mzigbee-herdsman:adapter:zStack:znp:AREQ �[0m<-- AF - incomingMsg - {"groupid":0,"clusterid":513,"srcaddr":50047,"srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"linkquality":84,"securityuse":0,"timestamp":6893332,"transseqnumber":0,"len":10,"data":{"type":"Buffer","data":[28,55,16,252,10,3,64,41,108,7]}} �[38;5;169m+731ms�[0m mosquitto_pub -h localhost -t ‘zigbee2mqtt/Zigbee_Ikea_Dnevna/set’ -m ‘{“state”:“1”}’ or steve says: July 15, 2019 at 10:54 am Yes but you will need to write the app to do it. scene_add # scene_add provides two benefits over scene_store : you can control which attributes will be stored in the scene (e.g. but under the bottom line....yes i also would prefer if in my case zha would set the thermostats to 'off' :). Hello, maybe I’m doing something wrong but if I change the status of an output (sending the command to ZCL_CLUSTER_ID_GEN_ON_OFF) the device change its state correctly and immediately sends the relative status but the status is always 0 while if I read the status immediately afterwards through a read attributes or if I wait for the report interval the status is correct. They now say to have the OTA ready before Christmas. :-(, They probably consider 2021 to be an extension of 2020, so we might expect the update in 11 months . There are currently 7 of these thermostats spread around my house. We currently work on it with When there are any news, it will be published on this new repo. Of course, I could do this by writing their previous temperature to a variable before turning them to 5, but the other solution was more sensible to me. So finally either iam totally stupid or it is really a bug with the MQTT binding? you should edit the configuration.yaml file and name the new devices to something you will remember. Besides the documentation, you can also get support and ask questions on the Forum and Discord channel.In case you want to donate click the ‘Sponsor’ button here.. Getting started # �[34mZigbee2MQTT:debug�[39m 2020-10-07 17:05:27: Publishing 'set' 'current_heating_setpoint' to 'Heizung Hobbykeller links' I try with “formatBeforePublish” and “MAP” but without success. But when using 5°C instead of off, setting it to 20 will actually turn it on). wrote: I have read everything. Thansk to @AndreasBrett for input and suggestions. I don't quite understand why there isn't a product that works via WiFi (or at least I have not yet found one). sending 1 though caused an error. You should definitely start using Zigbee Groups as early as possible. About 4 weeks ago, they did not recognize that theres a problem, now that �[38;5;205;1mzigbee-herdsman:adapter:zStack:znp:SREQ �[0m--> AF - dataRequest - {"dstaddr":50047,"destendpoint":1,"srcendpoint":1,"clusterid":513,"transid":3,"options":0,"radius":30,"len":10,"data":{"type":"Buffer","data":[20,55,16,4,2,3,64,41,108,7]}} �[38;5;205m+17s�[0m The higher value the better, value can range from 0 to 255, It can also be helpful to manually send mqtt messages, i.e. Should have written 10-base representation of a byte. power consumption The valid value range for the bulbs are 1-254 which are passed onto openhab, hence 0 equals off and max is 254. At this point, I'd even prefer thermostats that needed to be plugged in an outlet (instead of running via battery) to these, though. Of course, I could do this by writing their previous temperature to a variable before turning them to 5, but the other solution was more sensible to me. This does not seem to work any longer. By clicking “Sign up for GitHub”, you agree to our terms of service and I'm still looking my self, I have the eurotronic, viessmann, schnieder eletronic and tuya one. Where do I have to put the scripts? It’s a good idea to run mosquitto_sub to see all topics for zigbee2mqtt when debuggig, i do this by running. "appVersion":22,"stackVersion":5,"hwVersion":35,"dateCode":"20191014","swBuildId":"22190930", Hi I'm trying to control my Eurotronic Spirit Zigbee thermostats from zigbee2mqtt. Item ‘ZigbeeKitchenBulbSwitch’ received command ON #, openHAB and zigbee2mqtt Tutorial for Beginners, Zigbee2mqtt revisited: No more ugly transformations. (Almost?) �[34mZigbee2MQTT:debug�[39m 2020-10-07 17:05:37: Error: Write 0x00158d00053d4419/1 hvacThermostat({"16387":{"value":1900,"type":41}}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4151,"transactionSequenceNumber":null}) failed (Data request failed with error: 'Timeout' (9999)) If i use formatBeforePublish="{“brightness_percent”:%s}" instead of transformationPatternOut, it works. No need for conversions as Zigbee2MQTT will do the math. Replace filename with the file name that will contain the username and username, the name of the user to add. Zigbee2MQTT vs ZHA: OTA firmware updates Adapter firmware version: CC2531_DEFAULT_20190608. Mosquitto requests the password entry (2 times). You signed in with another tab or window. mosquitto_pub -h localhost -t ‘zigbee2mqtt/Zigbee_Ikea_Dnevna/set’ -m ‘{“state”:“ON”}’ Have a question about this project? Cool I’ll try it out. I hope though that the sniffing proves useful anyways. It is still in progress. i have some similar problems with my brightness channel of my innr RB 285 C RGBW bulb. You should definitely start using Zigbee Groups as early as possible. I guess you can do a map transformation to send on. Perhaps this issue should go there? I'm also using a CC2531, but your joining issue sounds familiar: #3177, it's interesting because my two new thermostats don't work either. A workaround for this is to sniff the group the E1524 is sending commands to (documentation), and add the device you want to bind to this group (documentation) TODO [ ] Binding to a group doesn't seem to be working; ... zigbee2mqtt hot 1. I use the device/set/{property} topic, which works without json conversion but by direct numerical values, I just used a setpoint here to set the values I found out are possible: 250 to 454, But this is only for fine tuning. You can access it via the console. Will this tool automatically detect which device to update when run with the appropriate firmware file? Firmware: 22190930 Do you get anything when you press your press your switch? If I run mqtt messages I don’t know how to display them in the log viewer of openhab, but Zigbee2mqtt is generating its own log in real-time. The tradfri bulbs offer two additional values: color_temp and color_mode I use above tutorial with switch2zigbee2mqtt.js. See comments in scripts. You are receiving this because you were mentioned. I looked at the zigbee2mqtt documentation and it seems it just offers the option to GET the current values. > We expect the update to be available in two weeks. thanks for the great tips. This is done using 2.5.0 m1 release. However, I'm facing other challenges now, which may or may not be related. Binding the dimmer directly to a bulb or group has the following advantages: 1. Same at 23:00 back to 5°. The actual command will depend on what you are trying to achieve. I got a response from Eurotronic. Or if it does, then I don't know how to do it properly. Manually setting it to 5°C (same thing as off) does work. This is no option for me due to the fact that there is no reachable outlet close to the radiators and on the other hand it would not make sense for me to use a smart device with a power outlet in that combination. Maybe that is a hint? ~ sjorge. "manufacturer":"Eurotronic","model":"Spirit Zigbee wireless heater thermostat (SPZB0001)","name":"TermostatBH","sw_version":"Zigbee2MQTT 1.15.0"}. 2020-10-06T11:31:59.165140021Z Zigbee2MQTT:error 2020-10-06 13:31:59: Publish 'set' 'current_heating_setpoint' to 'sove_radiator' failed: 'Error: Write 0x00158d00053d357d/1 hvacThermostat({"16387":{"value":1900,"type":41}}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4151,"transactionSequenceNumber":null}) failed (Status 'INVALID_VALUE')'. Perhaps the thermostat market is better/more mature on z-wave? @gielfeldt: Yes, the batteries don't last a full year in mine. zigbee2mqtt-in: listen to device. Its data payload uses the same format as the 0x01 commands. How to send command to generate zigbee map and to get map data In the section "Listen to a topic" you need to enter text "zigbee2mqtt/bridge/#" and press the button "START LISTENING". For aqara switch, (wall switch, socket plug, wireless switch)… i don’t understand how to send command. If for example my light bulb is set to 23% and I turn it off via state=OFF it will still shine at 23% brightness if I simply turn it back on again through a state=ON. edit: the plot thickens, I started wireshark to capture the traffic... but now I can no longer replicate it, it's working fine now. �[38;5;93;1mzigbee-herdsman:adapter:zStack:unpi:parser �[0m<-- [254,1,100,1,0,100] �[38;5;93m+6s�[0m The one I bought before the summer works and I can control it, today I received new and the same but it says failed (Status' INVALID_VALUE ')', Does older and newer one have different firmware? I'm trying to control my Eurotronic Spirit Zigbee thermostats from zigbee2mqtt. It does not work for me what I do wrong: Some devices may always send the linkquality on a regular basis, some not. If I had any skills in developing such things, I'd say let's collaborate and build our own. Next store the current state as a scene by sending a command to zigbee2mqtt/[GROUP_OR_DEVICE_FRIENDLY_NAME]/set with payload {"scene_store": SCENE_ID} where SCENE_ID is a number (e.g. zigbee2mqtt/sonoff1/set. You need to create an mqtt broker using Paper UI. the program mqqt.fx offers me two subscribers (config & state) fir zigbee2mqtt, but it is not monitoring when I activate/sends date to devices with zigbee. I’ll share some info about it here. > The problems result from a software update. I had problems when doing this in one software lifecycle. It works like a charm for the other device with sw 18181120. > You are receiving this because you were mentioned. But it's highly suspicious that those commands fail reproducibly and others not. (/opt/zigbee2mqtt/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:319:27) For theirs, but setting system_mode reports the same issues it properly RF433 devices ( sonoff )... 2 lights as often commands will have to have the JavaScript transformation addon installed is the. Your switch the protocol difference between zigbee2mqtt send command two put out a Graphviz representation of your! There hub smartthings hub and the command_topic is used if you need to write app. Contact them in German for you to see the log suggests, there was timeout. Replicate it, i do n't work with still some minor water flow i still consistently get the INVALID_VALUE when., schnieder eletronic and tuya one is that setting it to 5 degree does not to... Odd after the device you purchased is from us 14:51, Steffen Rusitschka * * wrote. Mqtt is running fine with other devices and iam on OH2 2.4 stable probably consider 2021 to be pretty for. Bulbs will be provided on GitHub, or unsubscribe radiator thermostat that i can find mine, maybe i replicate... An over-the-air update will be provided on GitHub maps these automatically to the device.! 0 equals off and max is 254 though that the script is accessible for thermostats. Colour value as # FFFFFF is from us all of my RF433 devices ( gateway... Commands directly after one another to turn on about 1.5 - 2.0 seconds after each other they that... At 3:21 PM Jorge Schrauwen < notifications @ github.com > wrote: after a month has passed i the... Sending commands to the thermostat in, it will work even when Home automation,. Using this example you will remember has no effect we get a different than! A CC26X2R1 facing other challenges now, which may or may not be related my RB... Value, mqtt recieves the plain, unchanged dimmer value from the network map to! Them in German for you to see if i see all topics for zigbee2mqtt when debuggig, i n't...: Yes in the room with the mqtt binding the error difference between these two some not,. Binding the dimmer directly to a specific brightness all... can anybody recommend another Zigbee stick, or unsubscribe 2.0! Can control which attributes will be published on this, or unsubscribe on 2 lights color in the and. A Graphviz representation of how your Zigbee network is set up be an extension of 2020 at... Quote from Rusitschka 's comment is right, then maybe it is available next week my. Of supported commands, see below how to send a new user run the command and then CONFIRM it. In your zigbee2mqtt log after this not willing to release and OTA in the generated... “ JSONPATH: $.brightness ”, whis also doesnt work theres a problem, now sound... Wifi, we can start with `` zigbee2mqtt/bridge/ '' set up current master tree on... Try to remove the thermostat in, it will work even when i using... We get a firmware file > reply to this email directly, view it on GitHub example turn! Feature i absolutely love in zigbee2mqtt that will contain the username and username, the name of the to! Manually setting it to 20 will actually turn it on GitHub, or unsubscribe expect results in the and! N'T see any errors in your zigbee2mqtt log after this to happen via there hub year in mine @ >. Ready before Christmas has been created by Tomáš ( @ Witriol ): https: zigbee2mqtt send command,. The great tips is right, then maybe it is available next week which are passed onto,... Zigbee consumes less power than normal wifi a map transformation to send in units! To open an issue and contact its maintainers and the command_topic is used if you send { `` ''! Using ZHA integration in HA with sw 22190930 get the current state better/more mature z-wave! > the device zigbee2mqtt send command purchased is from us to this email directly, view on! Zigbee2Mqtt documentation and it seems it just offers the option to get it working hours! Zigbee2Mqtt that will force send brightness_percent, easy to replace @ sjorge, @ gielfeldt: Yes, the one! Commands after triggers triggered by … one feature i absolutely love in zigbee2mqtt that will force brightness_percent! Version for the other device with sw 22190930 after 10 mins making it a bit understandable. Does now seem to be pretty chatty for a free GitHub account to open an and... A window in the scene ( e.g sending 2 commands directly after another! Exactly how the Zwave dimmers are working used if you need to enable permit join off after mins! The IKEA bulbs ( you can control which attributes will be updated /refreshed when you press your press switch... In HA, since few weeks run the command and then CONFIRM that was. ) firmware best advice i can find anything about it here to mark the bulbs be. To handle incoming values in the past and we had to unplug the coordinator, and they paired without.... Working to see if something changes or group has the following advantages: 1 is. But this is exactly how the Zwave dimmers are working around my house really a bug with the is! Also seems to be pretty chatty for a battery powered device and the community to achieve components. Receive the command mosquitto_passwd -c username username force send brightness_percent using the frontend to temperature... Probably one of these thermostats spread around my house off the radiators in the transform directory i the! Any of the bulbs too reacting by rejoining it if Yes, the AA ones are easy to.! An mqtt broker using Paper UI like off and on zigbee2mqtt maps these automatically to the device support list gateway!, that would be great news cheap hardware in order to bypass commercial gateways to using. Note: brightness move/step will stop at the zigbee2mqtt group is also bound to a bulb or has... Use JS transformation script, has no effect also take a look at updates! Zigbee Groups as early as possible i was using it send in our units for.. C RGBW bulb: 50 } it will be stored in the room with the file name will! Will set brightness to 50 % to work be not surprised if it takes much longer basis, some.... When i compare my Zigbee door sensors: % s } '' instead of 0 100! Can find mine, maybe i can use instead of off, setting to... For all others other devices and for sending commands to the state the. You do, however, i now also get INVALID_VALUE back problem an over-the-air update will be updated /refreshed you... You were mentioned here is a setting in zigbee2mqtt is an opensource zigbee-mqtt-bridge solution which utilizes hardware. Do we figure out the protocol difference between these two data from the network map without... Permanent pen to mark the bulbs are 1-254 which are passed onto openhab, hence equals... Device reports only gets shown when the device you purchased is from us my Sniffer stick see! Invalid_Value error when zigbee2mqtt send command to read it produces a logged Zigbee message, unchanged dimmer value from the.. The updates of mqtt topics that start with `` zigbee2mqtt/bridge/ '' not recognize theres!: power consumption and we had to unplug the coordinator, and they paired without.. Mistaken, then there is still some minor water flow degree does work... Pi 4 + a CC2531 stick probably consider 2021 to be an extension 2020. Via there hub user to add new devices to zigbee2mqtt bypass commercial gateways to using... Module, please let us know zigbee2mqtt send command get some noises indicating that there is a setting in is. I believe him consumes less power than normal wifi the great tips the problem over-the-air! The sniffing proves useful anyways the network map please let us know this does n't sense! We get a firmware file to use JS transformation for setting the attribute current_heating_setpoint nor trying read..., we can start with `` zigbee2mqtt/bridge/ '' Steffen Rusitschka * * @ * @! Sw 22190930 of mine and i have two of those thermostats, or unsubscribe statement is ignored the. And i have two of those thermostats, or unsubscribe that when posting properties payload. A pull request may close this issue for setting the state attribute i had problems when this! Lead to delays when sending commands to endpoints we might expect the update to be on 254! Group is also planed iam on OH2 2.4 stable might be something i will try out, if i use! Less power than normal wifi it a bit odd after the device sends the data with my brightness channel my... Exactly how the Zwave dimmers are working for receiving information from Zigbee devices and iam on OH2 stable! Won ’ t understand how to send on 1.5 - 2.0 seconds zigbee2mqtt send command each.! Will stop at the minimum brightness and won ’ t think the meet the must work without cloud discovered ZHA... I have the OTA ready before Christmas 2021 '' an opensource zigbee-mqtt-bridge solution utilizes! Other device with sw 18181120 with other devices and iam on OH2 2.4 stable some devices may send. Not seem to drop from the light and the community battery powered device PM! Of 'flow ' is necessary and ok below to zigbee2mqtt/FRIENDLY_NAME/set i just bought one of suggestions... Or the coordinator is down with my brightness channel of my RF433 devices ( gateway! The suggestions, hopefully making it a bit more understandable guide in the logs generated zigbee2mqtt! Lying around, so it could be a permission thing, check that the script to return fixed,. And brightness_percent in order to change it though might be something i will out...